Ricoh SP3510SF User Manual
Page 128
For each user, you can specify which functions are available upon authentication. A maximum of 30
users can be registered.
1.
Start the Web browser, and access the machine by entering its IP address.
2.
Click [Restrict Available Functions].
3.
Enter the administrator password if required.
4.
Click [Apply].
5.
Under "Available Functions", enter the timeout value in seconds (5 to 60, the default is
30) in [User Authentication Timeout (Copy)].
Within the time specified here, user stays authenticated after paper is output when copying with the
exposure glass. Note that authentication for other functions will expire immediately after using that
function.
6.
Select [Restrict] for the functions you want to restrict, and then click [Apply].
Select [Do not Restrict] for the functions you do not want to restrict.
The user restriction setting is enabled for the selected function. Proceed to the following steps to
register users.
7.
Click [Available Functions per User].
A list of currently registered user entries appears.
2. Getting Started
126