Ricoh SP3510SF - Manual (Page 69)

• The Ethernet cable is not supplied with this machine. Select your cable according to the network
environment.
1. Connect the Ethernet cable to the Ethernet port.
CMF030
2. Connect the other end of the cable to the network (e.g., a network hub).
• For details about network environment settings, see p.70 "Configuring the Machine".
• For details about installing printer drivers for network connection, see the instructions provided on
the driver CD-ROM.
Reading the LED lamps
CMF062
1
2
1. Yellow: flashes when 100BASE-TX/RX or 10BASE-TX/RX is being used.
2. Green: comes on when the machine is properly connected to the network.
Connecting to a Telephone Line
You can connect the machine to the public switched telephone network (PSTN) directly or through a
private branch exchange (PBX).
Also, you can connect an external telephone to use the same telephone line for voice calls.
Connecting the Machine
67