Ricoh SP3510SF - Manual (Page 30)

You can either set this machine to always make combined/2-sided copies, or use this function only
when necessary.
Preparation for making combined/2-sided copies
To always make combined/2-sided copies:
1. Configure the machine's default [Duplex/Combine] setting.
For details, see p.257 "Copy Settings".
To use this function for the current job only:
1. Configure the setting by pressing [Dup/Comb] before starting the current job.
For details, see p.158 "Combining Pages and Making 2-sided Copies".
• You can make 2-sided copies manually with the Type 1 model.
• For details about how to make 2-sided copies using the Type 1 model, see p.169 "Making 2-
sided Copies Manually (Type 1 model)".
Copying both sides of an ID card onto one side of paper
You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet
of paper.
• This function is only available when the original is set on the exposure glass, not when it is set in the
ARDF or ADF.
CES165
You can either set this machine to always make photocopies in ID card copy mode, or use this function
only when necessary.
Preparation for copying an ID card
To always make photocopies in ID card copy mode:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.257 "Copy Settings".
To use this function for the current job only:
1. Guide to the Machine
28