Ricoh SP3510SF - Manual (Page 156)

• If you want to copy the front side of the original again, turn over the original on the exposure
glass, and then return to step 4.
• If you want to end the job, press [ ].
• The maximum number of copies is 99.
• You can change the paper tray for the current job by pressing the [ ][ ] keys. You can also select
to change the paper tray automatically according to the paper size (A4 or Letter).
• You can select the paper tray for printing out copies in [Select Paper] under copy settings. If you set
the machine to switch between tray 1 and 2 automatically depending on the paper size in this
setting, you can also specify the tray the machine uses first in [Paper Tray Priority] under system
settings.
• When making multiple copies of a multi-page document, you can select whether copies are output
in collated sets, or in page batches in the [Sort] setting under copy settings.
• If [Manual 2 Sided Scan Mode], which is available only with the Type 2 model, is enabled, you
can copy both sides of original with the exposure glass and make a 2-sided copy.
• If the time specified in [System Auto Reset Timer] under administrator settings passes without any
operation while "Set Back Side" or "Set Front Side" is shown on the screen, the copying will finish
automatically.
• To enable this function for the current job only, press [Dup/Comb] and select [Manual 2 Sided
Scan Mode]. To use it as the machine's default setting, configure [Duplex/Combine] under copy
settings.
• If a paper jam occurs, printing stops after the current page has been printed out. After the jammed
paper is removed, printing restarts from the jammed page automatically.
• If a scanning jam occurs in the ARDF or ADF, copying is canceled immediately. In this case, copy
the originals again starting from the jammed page.
• To place the original, see p.119 "Placing Originals".
• To make reduced or enlarged copies, see p.156 "Making Enlarged or Reduced Copies".
• To make combine or 2-sided copies, see p.158 "Combining Pages and Making 2-sided Copies".
• To make copies of an ID card, see p.167 "Copying Both Sides of an ID Card onto One Side of
Paper".
• To make advanced scan settings, see p.170 "Specifying Scan Settings".
• For details about [Select Paper] or [Sort], see p.257 "Copy Settings".
• For details about [Paper Tray Priority], see p.279 "System Settings".
• For details about [Manual 2 Sided Scan Mode], see p.257 "Copy Settings".
• For details about [System Auto Reset Timer], see p.298 "Administrator Settings".
4. Using the Copier Function
154