Ricoh SP3510SF - Manual (Page 187)

• If the [Limitless Scan] setting under scanner settings is enabled, you can place originals on the
exposure glass repeatedly in a single scan procedure.
• If [File Type] under scanner settings is set to [Multi-page], you can scan multiple pages to create a
single PDF or TIFF file containing all pages. However, if the file format is JPEG, a single-page file
will be created for every page scanned.
• If paper is jammed in the ARDF or ADF, the scan job will be discarded. Remove the jammed paper
and scan the entire originals again.
• For details about [Shortcut to Function], see p.298 "Administrator Settings".
• To place the original, see p.119 "Placing Originals".
• To configure advanced scan settings, see p.191 "Specifying the Scan Settings".
• For details about specifying the scan destination, see p.185 "Specifying the scan destination using
the One Touch buttons or [Pause/Redial] key".
• For details about specifying the scan destination from an LDAP server, see p.186 "Specifying the
scan destination from an LDAP server".
• For details about [Scanning Mode], [File Type], or [Limitless Scan], see p.263 "Scanner Settings".
• For details about how to remove the paper jammed in the ARDF or ADF, see p.375 "Removing
Scanning Jams (Type 2 model)" or p.379 "Removing Scanning Jams (Type 1 model)".
Specifying the scan destination using the One Touch buttons or [Pause/Redial] key
This section describes how to specify a destination using the following keys:
• One Touch buttons
Use these to specify destinations registered as Quick Dial entries.
• [Pause/Redial] key
Press this to specify the last used destination as the destination for the current job.
Using the One Touch buttons
Press the One Touch button to which the desired Quick Dial entry is registered.
Press the [Shift] key to use the Quick Dial entries Nos. 11 to 20.
Scanning Using the Control Panel
185