Ricoh SP3510SF - Manual (Page 433)

11. Appendix
Functions and Network Settings Available in
an IPv6 Environment
The functions and network settings of this machine that are available in an IPv6 environment differ from
those available in an IPv4 environment. Make sure the functions you use are supported in an IPv6
environment, and then configure the necessary network settings.
• For details about specifying the IPv6 settings, see p.287 "Network Settings" or p.330 "Configuring
the Network Settings".
Available Functions
Print via FTP
Prints documents via FTP using the EPRT and EPSV commands. Windows Vista/7 and an FTP
application that supports IPv6 are required to use these commands.
Printer
Prints documents using the printer driver.
Scan to FTP
Delivers files that have been scanned using the control panel to an FTP server.
Scan to E-mail
Sends files scanned using the control panel via e-mail.
Scan to Folder
Sends files scanned using the control panel to a shared folder on a computer on the network.
This function is not available on Mac OS X.
Network TWAIN Server
Controls the scanning function from a computer on the network, and delivers scanned data to the
computer directly. This function is available only to computers that have a TWAIN-supporting
application. The IP address of the multi-cast group supported by IPv6 is ff12::fb88:1.
Bonjour
Allows the machine to communicate with Bonjour protocol-supported computers on the network.
The IP address of the multi-cast group supported by IPv6 is ff02::fb.
LAN-Fax
Sends a document created in an application as a fax and without printing it.
431