Ricoh SP3510SF - Manual (Page 344)

Item Description
LDAP Search Select whether to enable or disable LDAP search to retrieve addresses for
scanner and fax destinations.
LDAP Search Timeout Enter the number of seconds before the machine considers the LDAP search
to have timed out (1 to 60).
To configure LDAP server settings, select the desired LDAP server from the list under "Program/Change/
Delete", and then click [Change] to open the "Edit LDAP Server" page. The following settings can be
made on that page.
LDAP Settings
Item Description
Identification Name
(Required) Enter the LDAP server's name. Can contain up to 32 characters.
Server Name
(Required) Enter the LDAP server's host name or IP address. Can contain up to 64
characters.
Search Base (Required) Enter the position within the LDAP directory's structure from which to start
user searches. Can contain up to 128 characters.
Port Number
(Required) Enter the port number used to connect to the LDAP server. The valid range is
from 1 to 65535 (default is 389 when [SSL] is [Inactive], or 636 when
[SSL] is [Active]).
SSL Select whether or not to use SSL to communicate with the LDAP server.
Select [Active] to encrypt communication between the machine and LDAP
server; select [Inactive] for communication without encryption.
8. Configuring the Machine Using Web Image Monitor
342