Ricoh SP3510SF User Manual
Page 444
Search base registration may be required depending on your server environment. When
registration is required, unspecified searches will result in error.
Check your server environment and enter any required specifications.
12.
Enter the port number used to connect to the LDAP server in [Port Number (Required)].
Specify a port according to your environment.
13.
Select whether or not to use SSL with the LDAP server in [SSL].
Select [SSL] to encrypt communication between the machine and LDAP server; select [Inactive] for
communication without encryption.
The port number will automatically change depending on this setting: it will be 389 when set to
[None], or 636 when set to [SSL].
14.
Select the authentication method in [Authentication].
Authentication setting must comply with your server's authentication settings. Check your server
settings before setting this machine.
If you select [Active], authentication is Cleartext, in which a password is sent to the LDAP server
without any encryption processing.
If you select [High Security], authentication is CRAM-MD5.
If [Active] or [High Security] is selected, you must proceed to the next steps to set [Login Name
Attribute], [User Name (Optional)], and [Password (Optional)].
15.
Enter the user name prefix or login name attribute of Bind DN, such as “uid” or “cn” in
[Login Name Attribute].
The attribute value may change depending on the server environment.
16.
Enter the user name to log in to the LDAP server in [User Name (Optional)].
17.
Enter the password to log in to the LDAP server in [Password (Optional)].
18.
Select the character code the LDAP server uses for [Japanese Character Code Set
(Required)].
19.
Click the [Start] button for connection test.
Access the LDAP server to check that the proper connection is established. Check authentication
works according to the authentication settings.
20.
Confirm the result of the connection test.
If the connection test fails, check your settings and try again.
This function does not check search conditions or the search base.
21.
Under "Search Conditions", enter an attribute type by which the user can be distinguished
in the following: [Identification Name (Required)], [Email Address (Required)], [Fax
Number (Required)], [Company Name (Required)], and [Department Name (Required)].
You can enter an attribute as a typical search keyword. Using the entered attribute, the function
searches the LDAP server's Address Book.
11. Appendix
442