Cleaning, Putting into storage, Front panel connectors and indicators – VXI 3002 User Manual
Page 29: Cleaning -3, Putting into storage -3, Front panel connectors and indicators -3
Advertising
INSTALLATION AND POWER-UP
2-3
INSTALLATION
Cleaning
Before commencing any cleaning, switch off the instrument and disconnect the mainframe from the
supply. The exterior surface of the case may be cleaned using a soft cloth moistened in water.
Do not use aerosol or liquid solvent cleaners.
Putting into storage
If the instrument is to be put into storage, ensure that the following conditions are maintained:
Temperature range:
−40 to +70°C
Humidity:
Less than 93% at 40°C
Front panel connectors and indicators
The front panel with its connectors and indicators is shown in Fig. 2-1 below:
Fig. 2-1 3002 front panel showing connectors and indicators
Advertising