V-Tech CAT5 System Technical Guide - Manual (Page 117)

Page 117 K5 System Technical Guide
5.3.7§Management§of§Block§C5-IPC
The management of C5-IPC provides access to all the parameters of a C5-IPC, the different param-
eters can be set, changed and saved according to different requirements on each of the C5-IPC.
Right click on the C5-IPC, and select the Management, see the below window:
Read From Device: To upload
all the parameters saved in
the C5-IPC to the computer
Parameter management: To
set the parameters of C5-IPC
Call Table: To set local, IP
call table and call priority of
each C5-IPC
Close: to exit
5.3.7.1 Call Table