V-Tech CAT5 System Technical Guide - Manual (Page 45)

Page 45 K5 System Technical Guide
• Setup (Debug State->2. Setup)
Table 3
Item Descriptions Factory Set
1. Language
When Several languages are available, can be set to choose
different languages
[1]
English
2. Tone Select 12 calling tones are available [03]
3. Tone Volume Adjust the volume of calling tone [03]
4. Unlock Code The unlock code here serves as Unlock code 1 [1111]
5. Code Check…
To check the unlock code of each room code, when the door
station works under private unlock mode
6. Clock…
To set the date and time of the door station that shows on
the screen display
Real time
7. Setup code… To change the setup code of the Door station [88888888]
8. About To show the information of the device
Item Descriptions Factory Set
1. Display Mode Reserved [0]
2. Camera Power-on
To choose to power the camera always or to power only when
door station is activated
[0]
Power
when
activated
3. Enable name list Enable/Disable namelist function [0]
4. Door Open Alarm reserved
5. Disable Intercom Enable/Disable intercom function between montiors [0]
6. Protect Setup Reserved
7. Open Card Mode Reserved
8. Support ST-NSW To choose to use with ST-NSW or C5-IPC
[0]
Use with
C5-IPC