V-Tech CAT5 System Technical Guide - Manual (Page 119)

Page 119 K5 System Technical Guide
Here we can choose to Use Project Default, refer to previous chapter Default project parameters.
Or we can untick the item, and set the Call priority manually. Maximum 8 Guard centers can be set
for each C5-IPC.
5.3.7.2§Parameters§Management
Click on Parameters management to get to the window below:
Button Description:
Read from Device: Read all the parameters stored in the device
Write To Device: Write all the parameters to the device
Reset To Default: Reset all the parameters in the database to Default(Note that the operation is for
database in PC, if you want to reset the device parameters, press Reset To Default and then press
Write To Device)
Import: Import a parameter file that has been saved previously to reset the parameters.
Export: Export a parameter file to backup the current parameters.
Close: To exit