7§independent§access§controller:§gp-acs, C~40 – V-Tech CAT5 System Technical Guide User Manual
Page 31
Page 31
K5 System Technical Guide
• PA204: Reserved in normal status, for door
station communication in test status
• LED201: Power indicator
• LED202: Reserved
• LED203: Picture saving indicator
• LED204: Picture play indicator
• JWP101: Power input, DC 24V
• RS485: PC port. To update the firmware
• CN-NET: RJ45 Network Port, connected to
LAN
• FM-SET: Video match switch
Specification
• Power supply:
DC24V
• Standby current:
78mA
• Working current:
135mA
• Working temperature:
-10
0
C~40
0
C
• Connection port:
RJ45
• Dimensions:
140*150*60mm
2.3.4.7§Independent§Access§Controller:§GP-ACS
GP-ACS is an independent access controller, used for the entrance without the need for door sta-
tion. Two locks and card readers can be connected to this device, so it can control two entrances
at the same time. GP-ACS can manage cards independently or through the PC in the network.
• Tow doors control ports (card reader port, electric lock port and status test)
• Lock release delay time setting
• Lock type setting
• Work status indicator
Parts and function
s
• Power: Power indicator, always ON while working
• LINK: Signal indicator, flicker means signal is transmitted in the bus line
• IN-USE: Status indicator, ON while working
C5-IMC
1
ON
DIP
2 3 4 5 6
P- P+ P- P+
T/R+
FM-SET
T/R-
S201
PA201 PA202 PA203 PA204
LED201
LED202
LED203
LED204
S201
PA201
PA202 PA204
PA203
LED202 LED203
LED204
LED201
JWP101 RS485 CN-NET FM-SET