V-Tech CAT5 System Technical Guide - Manual (Page 71)

Page 71 K5 System Technical Guide
Distributor type SW1 setting
C5-F4
C5-F422
C5-F414
F4/F4DV/F4Q
F4/F4DV/F4Q
F4/F4DV/F4Q
4.4.2.2§DIP§switch§setting
S1 is a 6-bit DIP switch; each of them is designed to have a specified function.
• DIP status
Each bit can be set to be ON or OFF, shows below:
ON(1)
=
OFF(0)
=
ON ON
1 2 3 4 5 6
ON
• Description of DIP switch
Bit NO. Function Status Description
DIP1 MDS selection
ON C5-MDS connected
OFF No C5-MDS connected
DIP2 Audio Channel
ON Apply C5-F414
OFF Apply C5-F4 or C5-F422
DIP3 Video Channel
ON Apply C5-F422
OFF Apply C5-F4 or C5-F414
DIP4
Door station
mode selection
ON Door station works as common door station
OFF Door station works as unit door station
DIP5 Guard Monitor
ON
Press call button of monitor to call Guard Monitor whose
address is 0099
OFF Press call button of monitor to call Switchboard
DIP6
Network video
controlling
ON
Indoor monitor shows the network video when answer-
ing call from Switchboard
OFF
Indoor monitor doesn’t display video when answering
call from Switchboard