V-Tech CAT5 System Technical Guide - Manual (Page 150)

Page 150 K5 System Technical Guide
5.5.4§Card§Console§
Click Card Console into setting interface,
just like the following picture shows.
5.5.4.1§Browse
Display all card information in detail,
including the card No, Remark, Card
Person, Card type, room No, whether
downloaded or not, and added time and
operator.
Click Detail tab, just like the right picture
shows:
Authorized Entrance: All the C5-IPC that
are authorized to be associated with the
slected card
No Authorized Entrances: All the C5-IPC
that have nothing to do with the select-
ed card
5.5.4.2§Toolbar
Click New, select the target devices in
the No Authorized Entrances frame, and
double click the targets to move them
to Authorized Entrance frame. If the tar-
get devices have been in the Authorized
Entrance frame, just go to next step.
Chapter 5 K5 System Softwares