V-Tech CAT5 System Technical Guide - Manual (Page 52)

Page 52 K5 System Technical Guide
• Setup (Debug State->1#->2. Setup)
Table 3
Item Descriptions Factory Set
1. Language To choose different languages via SD Card
[01]
English
2. Tone Select 12 calling tones are available [03]
3. Tone Volume Adjust the volume of calling tone [03]
4. Unlock Code To change the unlock code [1111]
5. Display Mode
Choose to show / not to show the view of visitor when door
station is making a call
[0] show
6. Clock…
To set the date and time of the door station that shows on
the screen display
Real time
7. Setup code… To change the setup code of the Door station [88888888]
8. About To show the information of the device
Item Descriptions Factory Set
1. Unlock Code 2 Reserved None
2. Unlock Code Mode Reserved [0]
3. Camera Power-on
To choose to power the camera always or to power only when
door station is activated
[0]
Power
when
activated
4. Reserved Reserved
5. Disable Intercom Disable/Enable intercom function between monitors
[0]
Enable
Chapter 4 K5 System Settings