V-Tech CAT5 System Technical Guide - Manual (Page 142)

Page 142 K5 System Technical Guide
Channel On Start :
Layout: To set initial aspect ratio for video screen when IP-Agent gets start
Channel Number: To set initial channel number for video screen when IP-Agent gets start
Enable Max Channel: Deselect the option to disable 9 and 12 channel selection in the main frame.
Monitor On Start: To select specific DS/CDS to monitor automatically when IP-Agent starts.
View: Device list display setting
Show IP: Deselect the option to hide IP address of devices
Auto Collapse List: To set display format of device list, call list & alarm list. You can unfold more
than one list in the frame if deselecting the option. If not, you just can unfold only one list, the pre-
vious unfolded list will be folded automatically if you unfold a new list.
Auto Size List: It is available only when Auto Collapse List is activated . If select Auto Collapse List &
then select the option, list will be unfolded to max size.
Play time: how many times the alarm sound is played
Ignore Time: A certain period of time after which the alarm tip/window will be disabled when
there In no answer on the PC.
5.4.7.3§View§&§Layout
Chapter 5 K5 System Softwares