V-Tech CAT5 System Technical Guide - Manual (Page 120)

Page 120 K5 System Technical Guide
GL Call IM: To set Prior-
ity for Switchboard call-
ing indoor monitor.
GL Call DS: To set Pri-
ority for Switchboard
calling door station.
CDS Call IM: To set Pri-
ority for Common Door
Station calling indoor
monitor.
DS Call IM: To set Prior-
ity for door station call-
ing indoor monitor
DS Call GL: To set Priority for door station calling Switchboard.
IM Call GL: To set Priority for indoor monitor calling Switchboard.
Inline IM To IM: To set Priority for indoor monitor calling indoor monitor in the same block
Outline IM To IM: To set Priority for indoor monitor calling indoor monitor between blocks.
1) General
Number of Monitor: How many monitors can monitor the door station at he same time, ranging
from 1~5
Talk On Mon: Enable/Disable the talk function when monitor is doing monitoring
Unlock On Mon: Enable/Disable the unlock function when monitor is doing monitoring
IM Monitor Time: To set Monitor Time from IM monitor to Door Station, ranging from6~600s
Call Wait Time: To set calling waiting time from door station to monitor. Range from 10 to 600s
Call Talk Time: To set limitation for talking time, Range from 10 to 600s
IM To IM Talk Time: To set limitation for talking time between IM and IM, Range from 10 to 600s
Call Transfer Wait Time: To set the waiting time before diverting calling to next Switchboard when
there is no answer. Set to 0 to disable divert function when no answer.
Extend Room Table Mode: To set the code rule for multi-monitors in one apartment
Network Intercom: Enable or Disable Network Intercom between monitors
2) Call Priority
Set priority for different call. Ranging from 1 to 5. The higher the value of number, the higher the
priority. Note that calls of the same call type can not cut one another. See below:
Chapter 5 K5 System Softwares