Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 - Manual (Page 15)

3. Safety Decals
PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter 15
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-995
WARNING
SHEAR POINT
Moving parts can
crush and cut. Keep
hands clear of
sprocket and chain.
DC-1382
Decal “G”
Location: Corner of motor mount
Size: 2-13/16" x 17/16"
Part #: DC-889
Decal “F”
Location: Top of belt guard
Size: 4-1/2" x 2"
Part #: DC-995 Decal “E”
Location: Corner of motor mount
Size: 4-1/2" x 2"
Part #: DC-994
Decal “H”
Location: Corner of mount plate
Size: 4" x 1-3/4"
Part #: DC-1382
Decal “I”
Location: One per section centered on back of top flange
Size: 9" x 3-3/4"
Part #: DC-834