Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 User Manual

Page 43

Advertising
background image

5. Assembly

PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter

43

C. Connect the 3/4" x 48" liquid-tight flex conduit to the drive end of the 3/4" rigid conduit using one

3/4" conduit coupling and one 3/4" liquid-tight flex conduit coupling.

(See Figure 5AA.)

1. Thread a 3/4" conduit coupling onto the 3/4" rigid conduit.

(See Figure 5AA.)

2. Thread a 3/4" flex conduit coupling body onto the 3/4" conduit coupling.

(See Figure 5AA.)

3. Slide a 3/4" flex conduit coupling cap onto the 3/4" flex conduit followed by a plastic ring.

(See Figure 5AA.)

4. Thread a steel ring into the 3/4" flex conduit.

(See Figure 5AA.)

5. Thread the 3/4" flex conduit coupling cap onto the 3/4" flex conduit coupling body.

(See Figure 5AA.)

Figure 5AA

D. Attach the 3/4" x 12" liquid-tight flex conduit to the other end of the rigid conduit using one 3/4"

conduit coupling and one 3/4" liquid-tight flex conduit coupling.

(See Figure 5AB.)

E. Connect the two (2) junction boxes together using the 1" x 4-3/4" conduit nipple.

(See Figure 5AB.)

F. Connect the 3/4" x 12" liquid-tight flex conduit to the left junction box using one 3/4" liquid-tight flex

conduit coupling and one 1" to 3/4" reducer bushing.

(See Figure 5AB.)

G. Attach the 3/4" x 40" liquid-tight flex conduit to the right junction box using one 3/4" liquid-tight flex

conduit coupling and one 1" to 3/4" reducer bushing.

(See Figure 5AB.)

Figure 5AB

Advertising