Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 - Manual (Page 25)

5. Assembly
PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter 25
Hanger Bracket Assembly
A. Bolt the nylon bearings and hanger brackets to the connecting stubs using hex bolts, lock washers
and hex nuts as shown in Figure 5D .
Figure 5D
B. Bolt the hanger brackets to the back shields using two (2) 5/8"-11 x 2" hex bolts, two (2) square
washers, two (2) lock washers and two (2) hex nuts as shown in Figure 5E .
Figure 5E