Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 - Manual (Page 37)

5. Assembly
PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter 37
Motor Jack and Base Assembly
A. Attach the motor mount base assembly to the head section using four (4) 3/4" x 2" bolts,
lock washers and hex nuts. (See Figure 5U.)
B. Attach the motor jack assembly to the motor mount base assembly using four (4) 1/2"-13 x 1-1/2"
bolts, 1/2" flat washers and 1/2" hex nuts.
Figure 5U