Maintenance, Chapter 9 maintenance, Maintain the auger – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 User Manual
Page 63
![background image](/manuals/277757/63/background.png)
PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter
63
9. Maintenance
Maintain the Auger
A. Use caution when repairing or replacing equipment parts.
B. Make sure ALL decals are legible and securely attached to the auger. If necessary, replace them
FREE OF CHARGE by contacting GSI at:
GSI
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
C. Ensure that ALL electric motors, etc., are operating at the proper speed.
D. Make sure ALL electrical wiring is not damaged and that it meets proper wiring codes.
E. Make sure ALL components are in good working condition before use.
WARNING
ALWAYS shut down and disconnect the power supply before adjusting,
servicing or cleaning the equipment.
NOTICE
ALL SPEED REDUCERS ARE SHIPPED DRY. OIL MUST BE ADDED PRIOR TO
OPERATION. Do not operate the unit without making sure it contains the correct
amount of oil. Do not overfill or underfill with oil or injury to personnel, unit or
other equipment may result.
Do not mix non-synthetic and synthetic oil in the unit.
NOTICE