Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 - Manual (Page 36)

5. Assembly
36 PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter
Channel Extension Kit
A. 131' and 135' Sweeps need an extension kit installed.
B. Attach the center weight weldments to the adjustable center weight channel using eight (8)
1/2" x 1-1/4" bolts, split lock washers and hex nuts. The adjustable center weight has three (3) sets
of holes for the center weight weldments to adjust the weights.
(See Figure 5S.)
Figure 5S
C. Place assembly on top of the back tail section, around the tires. The end of the adjustable center
weight should be placed under the tail frame. (See Figure 5T.)
Figure 5T
D. Fasten assembly to tail section using two (2) 3/8" x 2-7/16" U-bolts, four (4) 3/8" lock washers and
four (4) 3/8" hex nuts.