Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 - Manual (Page 41)

5. Assembly
PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter 41
G. Loosely bolt the bottom belt guard to the motor mount using four (4) 3/8"-16 x 1" hex bolts, flat
washers and lock washers. (See Figure 5Y.)
Figure 5Y
H. Slide the top belt guard over the bottom belt guard as shown in Figure 5Y and tighten bolts.
I. Install belt guard bottom back plate.
J. Slide belt guard bottom pan and bolt into place.