Asus GigaX2024B - Manual (Page 112)

GigaX2024B/M L2 Managed Switch CLI Manual
92
deny-> Specify packets to reject.
any Any source host
[IFNAME] Egress interface name
Command Mode IP standard access-list mode
No/clear
no (permit|deny) any [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-std-nacl)#permit any [fa1/0/1]
13.8 (permit|deny) host IPADDR [IFNAME]
Syntax (permit|deny) host IPADDR [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
host A single host address
IPADDR Host address
[IFNAME] Egress interface name
Command Mode IP standard access-list mode
No/clear
no (permit|deny) host IPADDR [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-std-nacl)#permit host 10.0.0.1 [fa1/0/1]
13.9 (permit|deny) IPADDR MASK [IFNAME]
Syntax (permit|deny) IPADDR MASK [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.