Asus GigaX2024B - Manual (Page 155)

GigaX2024B/M L2 Managed Switch CLI Manual
135
IPADDR Destination address
<1-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp host IPADDR host IPADDR [<1-255>]
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit icmp host 10.0.0.1 host 10.0.0.2 2
[fa1/0/1]
13.64 (permit|deny) IPADDR [IFNAME]
Syntax (permit|deny) A.B.C.D [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
IPADDR Host address
[IFNAME] Egress interface name
Command Mode IP standard access-list terminal mode
No/clear
no (permit|deny) host IPADDR [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-std-nacl)#permit 10.0.0.1 [fa1/0/1]
13.65 remark .LINE
Syntax remark .LINE
Parameters .LINE description string
Command Mode IP standard access-list terminal mode