Asus GigaX2024B - Manual (Page 234)

GigaX2024B/M L2 Managed Switch CLI Manual
214
Command Mode User mode, Privileged EXEC mode, Configure terminal mode,
Interface mode
No/clear
Show
Default
Description
This command lists all of the command of the operation mode.
Examples ASUS#list
19.16 t r a c e l o g a d d ( d h c p -
snooping|dot1x|gvrp|igmp-snooping|lacp|stp)
Syntax tracelog add (dhcp-snooping|dot1x|gvrp|igmp-snooping|lacp|stp)
Parameters
Command Mode Configure terminal mode
No/clear
tracelog delete (dhcp-snooping|dot1x|gvrp|igmp-
snooping|lacp|stp)
Show
Default
Disable tracelog
Description This command starts the system logging the function.
Examples ASUS(config)#tracelog add dot1x
19.17 tracelog level (critical | high | low )
Syntax tracelog level (critical | high | low )
Parameters
Command Mode Configure terminal mode
No/clear
Show
Default
The default is critical
Description This command is to decide how much message will be print.
Examples ASUS(config)#tracelog level low