Asus GigaX2024B - Manual (Page 144)

GigaX2024B/M L2 Managed Switch CLI Manual
124
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any host IPADDR [eq] [<0-65535>]
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any host 10.0.0.2 eq 2 [fa1/0/1]
13.49 (permit|deny) (tcp|udp) host IPADDR [eq]
[<0-65535>] host IPADDR [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
host A single source host
IPADDR Source address
eq Match only packets on a given port numbe
<0-65535> Port number
host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [IFNAME]
Show Show acces-lists [number|name]