Asus GigaX2024B - Manual (Page 41)

GigaX2024B/M L2 Managed Switch CLI Manual
21
server-timeout: 20 seconds
Description This command sets the dot1x reauthentication timer.
Example ASUS(config-if)# dot1x timeout reauth-period 3600
6.10 dot1x host-mode (multi-host| single-host)
Syntax dot1x host-mode (multi-host| single-host)
Parameters multi-host: Enable multiple-hosts mode on the switch
single-host: Enable single-host mode on the switch
Command Mode Interface mode
No/clear
no dot1x host-mode
Show show dot1x all / show dot1x interface IFNAME
Default single-host
Description Allow multiple hosts (clients) on an 802.1X-authorized port.
Example ASUS(config-if)# dot1x host-mode multi-host
6.11 dot1x authentic-method (local | radius)
Syntax dot1x authentic-method (local | radius)
Parameters Local: Use the local username database for authentication
Radius: Use the Remote Authentication Dial-In User Service
(RADIUS) servers for authentication
Command Mode Configure terminal mode
No/clear
no dot1x authentic-method
Show show dot1x authentic_method
Default radius
Description Specify the authentic method for AAA.
Example ASUS(config)# dot1x authentic-method radius
6.12 dot1x user WORD PASSWORD <1-3000>
Syntax dot1x user WORD PASSWORD <1-3000>