Asus GigaX2024B - Manual (Page 172)

GigaX2024B/M L2 Managed Switch CLI Manual
152
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)#access-list 100 permit udp 1.1.1.1 0.0.0.0 eq 21
host 1.1.1.4 eq 22
13.84 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp IPADDR MASK host IPADDR
<0-255> code <0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK host IPADDR <0-255> code <0-255> [IFNAME]
Parameters Access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward
deny-> Specify packets to reject.
Icmp-> Internet Control Message Protocol
IPADDR source address
MASK source wildcard bits
. host A single destination host
IPADDR Destination address
<0-255> ICMP message type
<0-255> ICMP message code
[IFNAME] Egress interface name
Command Mode Configure terminal mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK host IPADDR <0-255> code <0-255> [IFNAME]
Show Show acces-lists [number|name]
Default