Asus GigaX2024B - Manual (Page 121)

GigaX2024B/M L2 Managed Switch CLI Manual
101
13.20 (permit|deny) (tcp|udp) host IPADDR [eq]
[<0-65535>] host IPADDR [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [eq] [<0-65535>] [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
host A single source host
IPADDR Source address
eq Match only packets on a given port numbe
<0-65535> Port number
host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR [eq] [<0-65535>] host
IPADDR [eq] [<0-65535>] [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp host 10.0.0.1 eq 655 host
10.0.0.2 eq 65 [fa1/0/2]
13.21 (permit|deny) icmp host IPADDR host IPADDR
[<1-255>] code [<1-255>] [IFNAME]
Syntax (permit|deny) icmp host IPADDR host IPADDR [<1-255>] code