Asus GigaX2024B - Manual (Page 67)

GigaX2024B/M L2 Managed Switch CLI Manual
47
Command Mode Configure terminal mode
No/clear
No spanning-tree max-age
Show show spanning-tree port detail IFNAME
Default 20 sec
Description Use the spanning-tree max-age configuration command on
the switch stack or standalone switch to set the spanning-tree
interval (sec) between messages the spanning tree receive.
Example ASUS(config)# spanning-tree max-age 20
10.35 spanning-tree port-priority <0-240>
Syntax spanning-tree port-priority <0-240>
Parameters port-priority the port priority
<0-240> Number from 0 to 240, in increments of 16
Command Mode Interface mode
No/clear
no spanning-tree port-priority
Show show spanning-tree port detail IFNAME
Default None or depends on ODM customer
Description Use the spanning-tree port-priority configuration command
on the switch stack or standalone switch to set the spanning-tree
the port priority between 0 and 240.
Example ASUS(config-if)# spanning-tree port-priority 128
10.36 spanning-tree priority <0-61440>
Syntax spanning-tree priority <0-61440>
Parameters priority the switch priority
<0-61440> valid range is 0 to 61440 in increments of
4096
Command Mode Configure terminal mode
No/clear
No spanning-tree priority
Show show spanning-tree port detail IFNAME
Default 32768