Asus GigaX2024B - Manual (Page 66)

GigaX2024B/M L2 Managed Switch CLI Manual
46
No/clear No spanning-tree hello time
Show show spanning-tree port detail IFNAME
Default 2 sec
Description Use the spanning-tree cost configuration command on the
switch stack or standalone switch to set the hello time to send
hello BPDUs.
Example ASUS(config)# spanning-tree hello time 2
10.33 spanning-tree link-type (auto|point-to-
point|shared)
Syntax spanning-tree link-type (auto|point-to-point|shared)
Parameters link-type the link type for the Rapid Spanning Tree
auto -> automatically determines if the interface is
attached to a point-to-point link or to shared
media
point-to-point -> a connection to exactly one other bridge
shared -> a connection to two or more bridges
Command Mode Interface mode
No/clear
no spanning-tree link-type
Show show spanning-tree port detail IFNAME
Default None or depends on ODM customer
Description Use the spanning-tree cost configuration command on the
switch stack or standalone switch to set the spanning-tree link
type for the Rapid Spanning Tree
Example ASUS(config-if)# spanning-tree link-type auto
10.34 spanning-tree max-age <6-40>
Syntax spanning-tree max-age <6-40>
Parameters max-age the interval (sec) between messages the
spanning tree receives from the root switch
<6-40> Valid range is 6~40 secs