Asus GigaX2024B - Manual (Page 45)

GigaX2024B/M L2 Managed Switch CLI Manual
25
7.4 no mirror session <1-8> source IFLIST
Syntax no mirror session <1-8> source IFLIST
Parameters no Negate a command or set its defaults
IFLIST source interface list ,ex fa1/0/1,fa1/0/3-5,fai1/0/7
Command Mode Configure terminal mode
Show
show mirror session
Default There are some mirroring rules on Switch.
Description This command resets the source interfaces’ received or
transmitted traffic or both the destination interface.
Example ASUS(config)#no mirror session 1 source fa1/0/2-4
8. QoS/CoS
8.1 cos cos-map PRIORITY QUEUE
GX2024B Queue range is 1-4
Syntax
cos cos-map <0-7> <1-6>
Parameters PRIORITY 802.1p priority
QUEUE internal class of service queues
Command Mode Configure terminal mode
No/clear
no cos cos-map
Show show cos cos-map
Default None or depends on ODM customer
Description Use the queue cos-map configuration command on the switch
stack or standalone switch to set which Cos queue a given
priority should map into.
Example ASUS(config)#cos cos-map 3 1
8.2 show cos cos-map
Syntax show cos cos-map