Asus GigaX2024B - Manual (Page 140)

GigaX2024B/M L2 Managed Switch CLI Manual
120
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination address mask
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] IPADDR MASK
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit tcp any eq 2 10.0.0.1 0.0.0.0
[fa1/0/1]
13.44 (permit|deny) (tcp|udp) any IPADDR MASK
[eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) any IPADDR MASK [eq] [<0-65535>]
[IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
any any source address
IPADDR Destination address
MASK Destination address mask