Asus GigaX2024B - Manual (Page 47)

GigaX2024B/M L2 Managed Switch CLI Manual
27
Command Mode Configure terminal mode
No/clear
No low-queue delay bound
Show show qos mode
Default The default setting of qos mode is highfirst mode
Description This command sets qos mode to highfirst mode
Example ASUS(config)# cos policy strict
8.5 show cos policy
Syntax show cos policy
Parameters qos quality of service (QoS)
mode CoS Scheduling mode of IEEE 802.1p
Command Mode Privileged EXEC mode
No/clear
no max bridge transmit delay bound
Show show max bridge transmit delay bound
Default
Description
This command show the qos mode.
Example ASUS# show cos policy
8.6 show qos egress bandwidth [IFNAME]
Syntax show qos egress bandwidth [IFNAME]
Parameters egress Egress keyword
[IFNAME] Interface’s name, ex: fa1/0/1 or fa1/0/12
Command Mode Privileged EXEC mode
No/clear
Show
Default
None or depends on ODM customer
Description This command used to show the Qos bandwidth informational
parameter for the outcoming packets.
Example ASUS# show qos egress bandwidth fa1/0/1