Asus GigaX2024B - Manual (Page 222)

GigaX2024B/M L2 Managed Switch CLI Manual
202
15.19 line loopback
Syntax Line loopback
Parameters
Command Mode Interface mode
No/clear
no line loopback
Show
Default
Enable or depends on ODM customer
Description Use the line loopback command on the switch stack or
standalone switch to detect loopback of the port.
Examples ASUS(config-if)#no line loopback
16. DHCP Client:
16.1 ip dhcp client
Syntax ip dhcp client
Parameters
Command Mode Interface mode
Default
Description
Start dhcp client
Examples ASUS(config-if)#ip dhcp client
16.2 no ip dhcp client
Syntax no ip dhcp client
Parameters
Command Mode Interface mode
Default
Description
Stop dhcp client
Examples ASUS(config-if)# no ip dhcp client