Asus GigaX2024B - Manual (Page 176)

GigaX2024B/M L2 Managed Switch CLI Manual
156
Description This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)#access-list 100 permit icmp host 1.1.1.1 1.1.1.4
0.0.0.0 2 code 3
13.88 access-list (<100-199>|<2000-2699>)
(deny|permit) (ip|tcp|udp|icmp) host IPADDR host
IPADDR [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) host IPADDR host IPADDR [IFNAME]
Parameters Access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward
deny-> Specify packets to reject.
Ip -> Any Internet Protocol
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
Icmp-> Internet Control Message Protocol
.host A single Source host
IPADDR Source address
.host A single destination host
IPADDR Destination address
[IFNAME] Egress interface name
Command Mode Configure terminal mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit)
(ip|tcp|udp|icmp) host IPADDR host IPADDR [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or