Asus GigaX2024B - Manual (Page 151)

GigaX2024B/M L2 Managed Switch CLI Manual
131
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp IPADDR MASK host IPADDR <1-255>
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp 10.0.0.1 0.0.0.0 host 10.0.0.2
2 [fa1/0/1]
13.58 (permit|deny) icmp any host IPADDR <1-255>
[IFNAME]
Syntax (permit|deny) icmp any host IPADDR <1-255> [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Ip -> Any Internet Protocol
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
Icmp-> Internet Control Message Protocol
.any any source address
.host A single destination host
IPADDR Destination address
<1-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any host IPADDR <1-255> [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.