Asus GigaX2024B - Manual (Page 224)

GigaX2024B/M L2 Managed Switch CLI Manual
204
Description Enable DHCP snooping on a VLAN or range of VLANs. The
range is 1 to 3000. You can enter a single VLAN ID identified by
VLAN ID number, a series of VLAN IDs separated by commas,
a range of VLAN IDs separated by hyphens, or a range of VLAN
IDs separated by entering the starting and ending VLAN IDs
separated by a space.
Examples ASUS(config)# ip dhcp snooping vlan 1-100
17.3 ip dhcp snooping trust
Syntax ip dhcp snooping trust
Parameters
Command Mode Interface Mode
No/clear
no ip dhcp snooping trust
show show ip dhcp snooping
Default
Description
(Optional) Configure the interface as trusted or untrusted. You
can use the no keyword to configure an interface to receive
messages from an untrusted client. The default is untrusted.
Examples ASUS(config-if)# ip dhcp snooping trust
17.4 show ip dhcp snooping
Syntax show ip dhcp snooping
Parameters
Command Mode Enable Mode
No/clear
show
Default
Description
DHCP snooping configuration is displayed
Examples ASUS#show ip dhcp snooping