Asus GigaX2024B - Manual (Page 48)

GigaX2024B/M L2 Managed Switch CLI Manual
28
8.7 show qos Ingress bandwidth [IFNAME]
Syntax show qos ingress bandwidth [IFNAME]
Parameters inress ingress keyword
[IFNAME] Interface’s name, ex: fa1/0/1 or fa1/0/12
Command Mode Privileged EXEC mode
No/clear
Show
Default
None or depends on ODM customer
Description This command used to show the Qos bandwidth informational
parameter for the outcoming packets.
Example ASUS# show qos ingress bandwidth fa1/0/1
8.8 qos egress bandwidth <1-1000>
GX2024B doesn’t support this function.
Syntax
qos egress bandwidth <1-1000>
Parameters egress Outgoing packets
bandwidth Set bandwidth informational parameter
<1-1000> Limit in 64-kilo-bits per second
Command Mode Interface mode
No/clear
no qos egress bandwidth
Show show qos egress bandwidth [IFNAME]
Default None or depends on ODM customer
Description This command used to set the Qos bandwidth informational
parameter for the outcoming packets.
Example ASUS(config-if)# qos egress bandwidth 20
8.9 no qos egress bandwidth
GX2024B doesn’t support this function.
Syntax
no qos egress bandwidth