Asus GigaX2024B - Manual (Page 115)

GigaX2024B/M L2 Managed Switch CLI Manual
95
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Icmp-> Internet Control Message Protocol
any any source address
any any destination address
<1-255> ICMP message type
<1-255> ICMP message code
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp any any [<1-255>] code [<1-255>]
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)#permit icmp any any 12 code 12 [fa1/0/1]
13.13 (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK
any [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK any [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Ip -> Any Internet Protocol
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
Icmp-> Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
any any destination address
[IFNAME] Egress interface name