Asus GigaX2024B - Manual (Page 131)

GigaX2024B/M L2 Managed Switch CLI Manual
111
13.32 (permit|deny) (tcp|udp) any [eq] [<0-65535>]
host IPADDR [eq] [<0-65535>] [IFNAME]
Syntax (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR [eq]
[<0-65535>] [IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Ip -> Any Internet Protocol
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
Icmp-> Internet Control Message Protocol
.any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
.host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR [eq]
[<0-65535>] [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit tcp any eq 12 host 10.0.0.1 eq 12
[fa1/0/2]