Asus GigaX2024B - Manual (Page 150)

GigaX2024B/M L2 Managed Switch CLI Manual
130
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Icmp-> Internet Control Message Protocol
host A single source host
IPADDR Source address
IPADDR Destination address
MASK Destination address mask
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) icmp host IPADDR IPADDR MASK <1-255>
[IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp host 10.0.0.1 10.0.0.2 0.0.0.0
2 [fa1/0/1]
13.57 (permit|deny) icmp IPADDR MASK host
IPADDR <1-255> [IFNAME]
Syntax (permit|deny) icmp IPADDR MASK host IPADDR <1-255>
[IFNAME]
Parameters permit-> Specify packets to forward
deny-> Specify packets to reject.
Icmp-> Internet Control Message Protocol
IPADDR Source address
MASK Source address mask
host A single destination host
IPADDR Destination address
<1-255> ICMP message type