Alpha Technologies FXM350_Micro350 UPS - Manual (Page 24)

017-241-B0 Rev B 22
3.4 Options for Communicating with the FXM
There are several ways to communicate with the Alpha FXM UPS:
1. The control panel page 42).
2. Window®’s HyperTerminal or other terminal emulation program to access the UPS command line system
over the USB interface (page 76).
3. Alpha UPS Monitor installed on your computer and connected to the FXM over the USB interface . The
Alpha UPS Monitor software can be downloaded from www.alpha.ca./downloads/.
4. Factory-installed FXM communication module to communicate with the Alpha FXM using any of the
following:
• On site PC
• Company intranet or the internet using a web browser (page 49).
• SNMP communications
Option 4
Option 4
Option 5
Options
On-Site
Ethernet Connection
(Use Alpha UPS Monitor
or HyperTerminal)
(Use a Web browser for
Ethernet connection
to on-site computer)
Ethernet
Port
FXM350 UPS
User’s PC
2 and 3
Option 1:
Control Panel
USB Port
Figure 12 — Alpha FXM Communication Options