Alpha Technologies FXM350_Micro350 UPS - Manual (Page 90)

017-241-B0 Rev B 88
7.5.8.2 Procedure
1. Type default:all and press Enter.
2. Enter the password and the Alpha FXM returns *default as confirmation.
7.5.9 Restoring All Parameters to Default Values
The purpose of this command is to reset the Alpha FXM to the factory default state. See Table D for a list of
parameters that will be restored to their default values.
CAUTION!
This command resets all parameters that are user-configurable. All previously pro-
grammed operation will be lost. Implement a backup plan for mission critical opera-
tions. This command is password protected.