Alpha Technologies FXM350_Micro350 UPS - Manual (Page 92)

017-241-B0 Rev B 90
1: Type fbulk
2: Erasing pop-up appears
6. In the uBug12 screen, type (all lower case) fbulk and press ENTER. The erasing pop-up appears.
It disappears when the Alpha FXM memory is erased. If an error message appears, send the fbulk
command again.
7. In the uBug12 screen, type (all lower case) fload(1 space);b and press ENTER. A pop-up appears
asking you to locate the new firmware. Look for a .sx record (*.sx). Select this new firmware. The fload
pop-up appears.
1: Type fload ;b
2: Look for .sx file