Alpha Technologies FXM350_Micro350 UPS - Manual (Page 50)

017-241-B0 Rev B 48
7.2.5 Viewing the 200-event Log
Using the LCD display, or web interface, you can view up to the last 200 events the Alpha FXM went through
and the malfunctions that triggered each of them. If more than 200 events occurred, the oldest is overwritten.
To clear this log, see “Operating the Alpha FXM, INV RECORD.”
To view the events on the LCD display, refer to the following procedure.
7.2.5.1 Procedure
1. From the Logo screen, navigate to the EVENT STATUS MENU.
EVENT STAT
MENUS
120/60/N
LINE
DATE EVENT HAPPENED
(YY:MM:DD) (Depends on
selected date format)
TIME EVENT HAPPENED
(HH:MM:SS 24-hour clock)
(Depends on selected date format)
EVENT COUNTER
(Event #1 shown)
OPERATING MODE THE Alpha FXM350 and Micro350
WAS IN WHEN THE EVENT HAPPENED (Line shown)
06:11:29
16:23:56 EVENT: 1
LINE
EVENT: 1
Event
Loading
ALARM STATUS
Over Load
2. Press the SELECT button to enter the submenu.
3. The following log screen appears.
4. Press the SELECT button. The event counter flashes.
5. Press the SCROLL button to scroll through the event counter.
6. When you reach the event you want press the SELECT button.
7. The event loading screen appears and then the log screen reappears with the details for that event.
8. Press the SCROLL button. One of the faults or alarms, shown in Table O and Table P, is displayed and is
the malfunction that triggered the event.