Alpha Technologies FXM350_Micro350 UPS - Manual (Page 91)

89 017-241-B0 Rev B
8. Maintenance
8.1 Updating the Software
The Alpha FXM firmware can be reinstalled or updated to the latest version with this procedure.
If your Alpha FXM is provided with the factory-installed FXM communication module, the firmware upgrade
can be done via an intranet or internet connection.
You will need the following items:
• USB connection cable to the Alpha FXM
• uBug12 software must be installed. It is available for download at www.alpha.ca\downloads.
Note
: When installing uBug 12, a warning notification may appear: Tera Term Pro not installed. Click OK.
Tera Term Pro is not used.
• Alpha’s firmware must be installed. It can be accessed with your computer and downloaded at www.
alpha.ca\downloads.
8.1.1 Procedure
1. Switch off the Alpha FXM.
2. Connect the USB cable if it is not already connected.
3. While pressing and holding the SELECT button, switch on the battery circuit breaker. The LCD panel
shows “Alpha XP ISP”.
Alpha XP ISP
V0.0.0.1
4. Start uBug12.
5. Type (all lower case) con(1 space)1(or the number of the computer’s comm port you are using) and
press ENTER. The screen shows “connected” when the connection is established.
1: Enter the Com Port
2: Screen shows CONNECTED